Dodge Ram 1500 Pick-Up 2002-2007, Dodge Ram 2500 & 3500 Pick-Up 2003-2007 Installation Instructions

C-TCB-27-INST-3-07

INSTALL INSTRUCTIONS C-TCB-27

DODGE RAM 1500 PICK-UP 2002-2007

DODGE RAM 2500 & 3500 PICK-UP 2003-2007

TOOLS REQUIRED:

3/16” Allen wrench

3/8” Standard Socket Set

3/8” Metric Socket Set

3/8” Ratcheting Wrench

Powered drill w/ 3/16” drill bit

Open-end wrench set

HARDWARE:

QTY DESCRIPTION PART #

1 Pole support assembly CM93071-27W

1 Telescoping pole assembly CM93072-3

1 Lag bolt ¼ x 1 GSM33060

Always!

 Read all instructions before installing any Havis-Shields Equipment Corp products.

 Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!

 Use hardware provided with install kit

SUB ASSEMBLY:

1. Confirm receipt of all hardware and components.

2. Remove front inner and outer passenger seat bolts on

vehicle.

INSTALLATION:

1. MOUNT C-TCB-27 INTO VEHICLE:

• Position pole support assembly on top of

passenger seat base mount and align holes in

pole support assembly with holes in seat base.

• Loosely attached factory seat bolts that were

removed during sub assembly.

• Tighten down factory passenger seat bolts and

5/16-18-nylock nut holding side support brace

to pole support assembly.

• Mount optional C-3090, computer-mounting

platform, to telescoping pole assembly using

hardware and instructions provided with

C-3090.

Telescoping pole

assembly

Pole support

assembly

Location of

passenger side factory

seat base bolts

PAGE 1
INSTALL INSTRUCTIONS C-TCB-27 DODGE RAM 1500 PICK-UP 2002-2007 DODGE RAM 2500 & 3500 PICK-UP 2003-2007 TOOLS REQUIRED: 3/16” Allen wrench 3/8” Standard Socket Set 3/8” Metric Socket Set 3/8” Ratcheting Wrench Powered drill w/ 3/16” drill bit Open-end wrench set HARDWARE: QTY DESCRIPTION 1 Pole support assembly 1 Telescoping pole assembly 1 Lag bolt ¼ x 1 PART # CM93071-27W CM93072-3 GSM33060 Always! Read all instructions before installing any Havis-Shields Equipment Corp products.