Yukon Install Instructions

INSTALL INSTRUCTIONS C-VS-1000-TAH

VEHICLE SPECIFIC CONSOLE

2007 CHEVY/GMC SUBURBAN/TAHOE/YUKON XL/YUKON

TOOLS REQUIRED:

Ratcheting wrench

Metric/Standard Socket Set

Standard Wrench Set

Power drill w/ 1/8” drill bit (optional)

Screwdriver set

T-20 torx bit

HARDWARE:

QTY

DESCRIPTION PART #

1 OEM switch bracket CM001800-3

4 ¼-20 Serrated nut GSM30023

2 ¼-20 x ¾” Hex bolt GSM33001

2 #10 x ¾” Sheet metal screw GSM33195

1 Torx screw hardware kit C-HK-1

OEM switch bracket

CM001800-3

Switch cutout filler plate

CM001800-4

Supplied lighter plugs

C-VS-1000-TAH

PAGE 1
INSTALL INSTRUCTIONS C-VS-1000-TAH VEHICLE SPECIFIC CONSOLE 2007 CHEVY/GMC SUBURBAN/TAHOE/YUKON XL/YUKON TOOLS REQUIRED: Ratcheting wrench Metric/Standard Socket Set Standard Wrench Set HARDWARE: QTY DESCRIPTION 1 OEM switch bracket 4 ¼-20 Serrated nut 2 ¼-20 x ¾” Hex bolt 2 #10 x ¾” Sheet metal screw 1 Torx screw hardware kit Power drill w/ 1/8” drill bit (optional) Screwdriver set T-20 torx bit PART # CM001800-3 GSM30023 GSM33001 GSM33195 C-HK-1 C-VS-1000-TAH Switch cutout filler plate CM001800-4 OEM s
PAGE 2
#1 View of factory full-length console with C-VS-1000-TAH Note: If your console is not equipped with adjustable pedal, tow package, and power brake switches proceed to step #13 #2 Remove factory cup holder/accessory pocket from console #3 CAREFULLY separate trim bezel from dashboard C-VS-1000-TAH-INST-1-07
PAGE 3
#4 #5 #6 Using a flat head screwdriver concentrate pressure on or around the trim bezels “J” clips Remove entire bezel and put aside.
PAGE 4
#13 Install lighter plugs and extend wires as necessary. #14 Slide C-VS-1000-TAH, front side first, as shown above. #16 Re-attach factory plug into switch box For added support install #10 x ¾” screws #15 Carefully drop backside of console as shown #18 #17 Be sure plug is secure and wires are carefully routed so not to chafe Align rear-mounting studs into factory console holes and attach using ¼” Serrated nuts.