Owner’s Manual Havis Rugged Mobile Docking Station For Dell XFR & ATG Computers DS-DELL-100 Series / DS-DELL-220 Series DS-DELL-101 DS-DELL-101-3 DS-DELL-103 DS-DELL-221 DS-DELL-223 DS-DELL-100 Series/200 Series/210 Series Havis Rugged Mobile Docking Station For Dell XFR & ATG Computers Havis, Inc. 75 Jacksonville Road, PO Box 2099 Warminster, PA 18974 47801 Anchor Court Plymouth, MI 48170 www.havis.com 1-800-524-9900 www.havis.
Before Beginning (Original Instructions) Havis is pleased to provide this Owner’s Manual to aid in the proper installation and use of the DS-DELL-100 Series/220 Series Docking Station for the Dell XFR & ATG laptop computers. For questions regarding the set-up of your DS-DELL-100 Series/220 Series Docking Station, please contact Havis at 1-800-524-9900 or visit www.havis.com for additional product support and information.
Operation - Docking (continued) 5) For theft deterrence, secure computer by locking Docking Station with supplied key (Hardware Kit Item 2). • FOR SAFE & PROPER SYSTEM FUNCTION, SPECIFIC DOCKING STATION MODELS MUST BE USED WITH SPECIFIC DELL COMPUTER MODELS. Lock 6) Power on computer. The Laptop Power Button LED will illuminate blue to indicate proper system function. Once docked, the Laptop Power Button may be used to power computer on/off. Laptop Power Button / LED - DS-DELL-100 SERIES (101, 103, ETC.
Table of Contents Operation - Docking Specifications 4 Parts Included 5 Port Replication Capability 5 Installation 6 Cable Management 7 Operation - Docking 9 Operation - Undocking • DO NOT MATE COMPUTER TO DOCKING STATION UNLESS COMPUTER’S DOCKING CONNECTOR ACCESS DOOR IS FULLY OPEN OR DAMAGE MAY RESULT. • DO NOT FORCE LAPTOP ONTO DOCKING STATION. IF THERE IS RESISTANCE, CHECK ALIGNMENT OF COMPUTER ON DOCKING STATION.
Cable Management (continued) Parts Included 5) Create a service loop with cables to ensure that no tension is on the connectors and to enable intended motion. Docking Station 6) Tie off cables onto a stationary part of the mounting system.
Installation Cable Management 1) Install the Mounting Bracket to the Motion Device using (4) 1/4“-20 screws (Hardware Kit Item 3). Torque screws to 120 in-lbs (13.4Nm) ± 10%. 1) Tip the Docking Station forward to a position that is comfortable to work with. NOTE: Numerous hole patterns present in Mounting Bracket will accommodate Havis Motion Devices as well as most competitors’. 1/4”-20 Screws 2) Install all cables that are necessary for computing needs.
Installation Cable Management 1) Install the Mounting Bracket to the Motion Device using (4) 1/4“-20 screws (Hardware Kit Item 3). Torque screws to 120 in-lbs (13.4Nm) ± 10%. 1) Tip the Docking Station forward to a position that is comfortable to work with. NOTE: Numerous hole patterns present in Mounting Bracket will accommodate Havis Motion Devices as well as most competitors’. 1/4”-20 Screws 2) Install all cables that are necessary for computing needs.
Cable Management (continued) Parts Included 5) Create a service loop with cables to ensure that no tension is on the connectors and to enable intended motion. Docking Station 6) Tie off cables onto a stationary part of the mounting system.
Table of Contents Operation - Docking Specifications 4 Parts Included 5 Port Replication Capability 5 Installation 6 Cable Management 7 Operation - Docking 9 Operation - Undocking • DO NOT MATE COMPUTER TO DOCKING STATION UNLESS COMPUTER’S DOCKING CONNECTOR ACCESS DOOR IS FULLY OPEN OR DAMAGE MAY RESULT. • DO NOT FORCE LAPTOP ONTO DOCKING STATION. IF THERE IS RESISTANCE, CHECK ALIGNMENT OF COMPUTER ON DOCKING STATION.
Operation - Docking (continued) 5) For theft deterrence, secure computer by locking Docking Station with supplied key (Hardware Kit Item 2). • FOR SAFE & PROPER SYSTEM FUNCTION, SPECIFIC DOCKING STATION MODELS MUST BE USED WITH SPECIFIC DELL COMPUTER MODELS. Lock 6) Power on computer. The Laptop Power Button LED will illuminate blue to indicate proper system function. Once docked, the Laptop Power Button may be used to power computer on/off. Laptop Power Button / LED - DS-DELL-100 SERIES (101, 103, ETC.
Before Beginning (Original Instructions) Havis is pleased to provide this Owner’s Manual to aid in the proper installation and use of the DS-DELL-100 Series/220 Series Docking Station for the Dell XFR & ATG laptop computers. For questions regarding the set-up of your DS-DELL-100 Series/220 Series Docking Station, please contact Havis at 1-800-524-9900 or visit www.havis.com for additional product support and information.
Owner’s Manual Havis Rugged Mobile Docking Station For Dell XFR & ATG Computers DS-DELL-100 Series / DS-DELL-220 Series DS-DELL-101 DS-DELL-101-3 DS-DELL-103 DS-DELL-221 DS-DELL-223 DS-DELL-100 Series/200 Series/210 Series Havis Rugged Mobile Docking Station For Dell XFR & ATG Computers Havis, Inc. 75 Jacksonville Road, PO Box 2099 Warminster, PA 18974 47801 Anchor Court Plymouth, MI 48170 www.havis.com 1-800-524-9900 www.havis.
