Owner’s Manual Havis Rugged Mobile Docking Station For Panasonic CF-53 Toughbook DS-PAN-410 Series DS-PAN-411 DS-PAN-411-2 DS-PAN-412 DS-PAN-412-2 DS-PAN-413 PKG-DS-PAN-412 PKG-DS-PAN-412-2 Havis, Inc. 75 Jacksonville Road, PO Box 2099 Warminster, PA 18974 47801 Anchor Court Plymouth, MI 48170 www.havis.com 1-800-524-9900 www.havis.
Before Beginning (Original Instructions) Havis is pleased to provide this Owner’s Manual to aid in the proper installation and use of the DS-PAN-410 Series Docking Station for the Panasonic CF-53 laptop computer. For questions regarding the set-up of your DS-PAN-410 Series Docking Station, please contact Havis at 1-800-524-9900 or visit www.havis.com for additional product support and information.
Operation - Undocking Table of Contents 1) If previously locked, unlock Docking Station using supplied key. Specifications 3 Parts Included 4 Port Replication Capability 5 Installation 6 Cable Management 7 Operation - Docking 9 Operation - Undocking 10 2) Depress Barrel Lock to unlatch Docking Station from computer. Precautions 3) Once unlatched grab both sides of computer and carefully lift out of Docking Station, rear end first.
Parts Included Operation - Docking Docking Station Hold Down Lug Antenna Module (DS-PAN-411-2, DS-PAN-412-2, and PKG-DS-PAN-412-2 ONLY) Locator Pins DO NOT FORCE LAPTOP ONTO DOCKING STATION. IF THERE IS RESISTANCE, CHECK ALIGNMENT OF COMPUTER ON DOCKING STATION. 1) Ensure Docking Station is unlatched by depressing button in Barrel Lock. 2) With rear of computer elevated, load front of computer into Docking Station ensuring the computer’s handle extends under the Front Hold-Down Bracket.
Cable Management (continued) Port Replication Capability 5) Create a service loop with cables to ensure that no tension is on the connectors and to enable intended motion. NOTE: Antennas only available on select Docking Station models (DS-PAN-411-2, DS-PAN-412-2, PKG-DS-PAN-412-2) 6) Tie off cables onto a stationary part of the mounting system. Antenna A Ethernet USB 3.0 RJ45 USB 2.
Installation Cable Management 1) Remove the Mounting Bracket from the packaging. Install the Mounting Bracket to the Motion Device using (3) 1/4“-20 x 5/8” long screws (Hardware Kit Item 3). Torque screws to 80 in-lbs (9.0Nm) ± 10%. 1) Tip the Docking Station to a position that is comfortable to work with. NOTE: Numerous hole patterns present in Mounting Bracket will accomodate Havis Motion Devices as well as most competitors’ 1/4”-20 Screws 2) Install all cables that are necessary for computing needs.
Installation Cable Management 1) Remove the Mounting Bracket from the packaging. Install the Mounting Bracket to the Motion Device using (3) 1/4“-20 x 5/8” long screws (Hardware Kit Item 3). Torque screws to 80 in-lbs (9.0Nm) ± 10%. 1) Tip the Docking Station to a position that is comfortable to work with. NOTE: Numerous hole patterns present in Mounting Bracket will accomodate Havis Motion Devices as well as most competitors’ 1/4”-20 Screws 2) Install all cables that are necessary for computing needs.
Cable Management (continued) Port Replication Capability 5) Create a service loop with cables to ensure that no tension is on the connectors and to enable intended motion. NOTE: Antennas only available on select Docking Station models (DS-PAN-411-2, DS-PAN-412-2, PKG-DS-PAN-412-2) 6) Tie off cables onto a stationary part of the mounting system. Antenna A Ethernet USB 3.0 RJ45 USB 2.
Parts Included Operation - Docking Docking Station Hold Down Lug Antenna Module (DS-PAN-411-2, DS-PAN-412-2, and PKG-DS-PAN-412-2 ONLY) Locator Pins DO NOT FORCE LAPTOP ONTO DOCKING STATION. IF THERE IS RESISTANCE, CHECK ALIGNMENT OF COMPUTER ON DOCKING STATION. 1) Ensure Docking Station is unlatched by depressing button in Barrel Lock. 2) With rear of computer elevated, load front of computer into Docking Station ensuring the computer’s handle extends under the Front Hold-Down Bracket.
Operation - Undocking Table of Contents 1) If previously locked, unlock Docking Station using supplied key. Specifications 3 Parts Included 4 Port Replication Capability 5 Installation 6 Cable Management 7 Operation - Docking 9 Operation - Undocking 10 2) Depress Barrel Lock to unlatch Docking Station from computer. Precautions 3) Once unlatched grab both sides of computer and carefully lift out of Docking Station, rear end first.
Before Beginning (Original Instructions) Havis is pleased to provide this Owner’s Manual to aid in the proper installation and use of the DS-PAN-410 Series Docking Station for the Panasonic CF-53 laptop computer. For questions regarding the set-up of your DS-PAN-410 Series Docking Station, please contact Havis at 1-800-524-9900 or visit www.havis.com for additional product support and information.
Owner’s Manual Havis Rugged Mobile Docking Station For Panasonic CF-53 Toughbook DS-PAN-410 Series DS-PAN-411 DS-PAN-411-2 DS-PAN-412 DS-PAN-412-2 DS-PAN-413 PKG-DS-PAN-412 PKG-DS-PAN-412-2 Havis, Inc. 75 Jacksonville Road, PO Box 2099 Warminster, PA 18974 47801 Anchor Court Plymouth, MI 48170 www.havis.com 1-800-524-9900 www.havis.