Telescoping Computer Mounts Installation Instructions

INSTALL INSTRUCTIONS C-PED SERIES

(C-PED1612-W2 or C-PED1612-W4)

SILVER BILLET™ TELESCOPING COMPUTER MOUNTS

C-PED1612-W2 Silver Billet Telescoping Computer Pedestal with 2” Offset Bracket

C-PED1612-W4 Silver Billet Telescoping Computer Pedestal with 4” Offset Bracket

TOOLS REQUIRED:

Ratcheting wrench

Socket set

Powered drill

Drill bit set

Screwdriver set

Standard Allen key set

HARDWARE:

QTY DESCRIPTION PART #

1 White Teflon washer CM93081

7 ¼-20 x ¾” Phillips machine screw GSM33124

3 ¼-20 Thin Nylock nut GSM30016-1

7 ¼” Flat washer GSM31005

4 ¼” Lock washer GSM31026

4 5/16” x 1” Hex head lag bolt GSM34203

Always!

 Read all instructions before installing any Havis-Shields Equipment Corp products.

 Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!

 Use hardware provided with install kit

PAGE 1
INSTALL INSTRUCTIONS C-PED SERIES (C-PED1612-W2 or C-PED1612-W4) SILVER BILLET™ TELESCOPING COMPUTER MOUNTS C-PED1612-W2 Silver Billet Telescoping Computer Pedestal with 2” Offset Bracket C-PED1612-W4 Silver Billet Telescoping Computer Pedestal with 4” Offset Bracket TOOLS REQUIRED: Ratcheting wrench Socket set Powered drill Drill bit set Screwdriver set Standard Allen key set HARDWARE: QTY DESCRIPTION 1 White Teflon washer 7 ¼-20 x ¾” Phillips machine screw 3 ¼-20 Thin Nylock nut 7 ¼” Flat washer 4 ¼” Lo
PAGE 2
Computer mount platform Adjust lever Optional Mounting Base C-PED-PLT shown (Mounts to floor) Offset bracket C-PED1612-W4 shown (Side mount support) 1. SUBASSEMBLY: • Determine location in vehicle where you can obtain a side and floor mount. • Be sure that determined locations would accept mounting bolts and screws without interference to other controls, wires, etc. 2. INSTALLATION • The C-PED Series mounts to a horizontal flat surface as well as a vertical flat surface.