Telescoping Computer Base Install Instructions

C-TCB-7-IMP-INST-12-04

INSTALL INSTRUCTIONS C-TCB-7-IMP

TELESCOPING COMPUTER BASE

CHEVROLET IMPALA SPECIFIC

C-SERIES-IMP CONSOLIDATOR® CONSOLE MOUNT

(Example: C-1400-IMP)

TOOLS REQUIRED:

3/16” Allen wrench Open-end wrench set

HARDWARE & COMPONENETS:

QTY DESCRIPTION PART #

1 Pole support assembly CM93071-7

1 Telescoping pole assembly CM93072-1

1 Spacer bracket CM93381

4 ¼-20 Hex nut GSM30005

4 ¼”Flat washer GSM31005

2 ¼-20-x ½”Hex head bolt GSM33000

2 ¼-20 x 1”Hex head bolt GSM33002

Always!

 Read all instructions before installing any Havis-Shields Equipment Corp products.

 Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!

 Use hardware provided with install kit

Pole support

assembly

Telescoping pole

assembly

¼-20 x ½” Hex

head bolt & ¼” Flat

washer

Spacer Bracket w/

¼-20 x ¾” Hex

head bolt & ¼” Flat

washer

PAGE 1
INSTALL INSTRUCTIONS C-TCB-7-IMP TELESCOPING COMPUTER BASE CHEVROLET IMPALA SPECIFIC C-SERIES-IMP CONSOLIDATOR® CONSOLE MOUNT (Example: C-1400-IMP) TOOLS REQUIRED: 3/16” Allen wrench Open-end wrench set HARDWARE & COMPONENETS: QTY DESCRIPTION 1 Pole support assembly 1 Telescoping pole assembly 1 Spacer bracket 4 ¼-20 Hex nut 4 ¼”Flat washer 2 ¼-20-x ½”Hex head bolt 2 ¼-20 x 1”Hex head bolt PART # CM93071-7 CM93072-1 CM93381 GSM30005 GSM31005 GSM33000 GSM33002 Always! Read all instructions before install
PAGE 2
SUB ASSEMBLY: 1. Confirm receipt of all hardware and components. 2. Install Chevrolet Impala Specific C-Series-IMP Consolidator® into vehicle using hardware and instructions provided. 3. Determine location on console to mount C-TCB-7-IMP and be sure to leave room on passenger side of console to mount. INSTALLATION: 1. Mount C-TCB-7-IMP on side of Chevrolet Impala Specific C-Series-IMP console. • Position C-TCB-7-IMP on Passenger side of console. • Attach to lower rail of console first.