Universal Telescoping Computer Base Install Instructions

C-TCB-14_INST_8-07

INSTALL INSTRUCTIONS C-TCB-14

UNIVERSAL TELESCOPING COMPUTER BASE

TOOLS REQUIRED:

3/16” Allen wrench

Ratcheting Wrench

Standard Socket Set

Powered Drill (if necessary)

Drill Bit Set (if necessary)

HARDWARE:

QTY DESCRIPTION PART #

1 Pole support assembly CM93071-14W

1 Telescoping pole assembly CM93072-14

4 ¼-20 Nylock nut GSM30016

4 ¼” Flat washer GSM31005

4 ¼ - 20 x ½” Hex head bolt GSM33000

Always!

 Read all instructions before installing any Havis-Shields Equipment Corp products.

 Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!

 Use hardware provided with install kit

SUB ASSEMBLY:

1. Confirm receipt of all hardware and components.

2. C-TCB-14 offers multiple mounting options.

a. Havis Shields extruded Trak Mount

b. Any flat surface with access to bolt.

3. Mounting option to be determined by installer.

Pole support

assembly

¼-20 x ½” Hex head

olts, washers & hex

nuts

Location to mount to

Trak or flat surface

Telescoping pole

assembly

PAGE 1
INSTALL INSTRUCTIONS C-TCB-14 UNIVERSAL TELESCOPING COMPUTER BASE TOOLS REQUIRED: 3/16” Allen wrench Ratcheting Wrench Standard Socket Set Powered Drill (if necessary) Drill Bit Set (if necessary) HARDWARE: QTY DESCRIPTION 1 Pole support assembly 1 Telescoping pole assembly 4 ¼-20 Nylock nut 4 ¼” Flat washer 4 ¼ - 20 x ½” Hex head bolt PART # CM93071-14W CM93072-14 GSM30016 GSM31005 GSM33000 Always! Read all instructions before installing any Havis-Shields Equipment Corp products.
PAGE 2
INSTALLATION: 1. Mount C-TCB-14 to Havis-Shields Trak Mount: • Mount console, transmission hump bracket(s), and Trak mount being sure to leave room for C-TCB-14 • Slide (4) ¼-20 x ½” Hex head bolts, (2) in each rail. • Place Pole support assembly so slots line up with hex head bolts on Trak mount. • Secure with ¼” Flat washers and nylock nuts. • Attach optional C-3090 Computer mounting platform to Telescoping pole assembly.