Datasheet

C-VS-1000-TAH_INST_12-10.docx rev 11-13
Remove factory cup holder/accessory
pocket from console
#2
CAREFULLY separate trim bezel
from dashboard
#3
If your console is not equipped with
adjustable pedal, tow package, and power
brake switches proceed to step #13
Note:
View of OEM / Factory full-length console.
NOTE:
The mount bolts for the OEM center
console may need to be loosened in order
to properly readjust the position so it will
accept the New C-VS-1000-TAH console.
Tighten OEM bolts when done.
#1