User Manual

1. Use the Raise/Lower cylinder Cap side
Bolt (B) to connect the HawkJaw
Suspension Ring (SR) to the Raise/
Lower cylinder (C).
2. Use the Raise/Lower cylinder Cap side
Lock Nut (N) to secure the Raise/Lower
cylinder Cap side Bolt (B).
3. Connect the Hanger Swivel (HS) to the
hanging cable.
4. Connect the HawkJaw Rod side (HR)
and Cap side (HC) hydraulic Leader
hoses to the Raise/Lower cylinder Rod
side (RR) and Cap side (RC) hoses. The
HawkJaw Rod side (HR) Leader hose
Quick Disconnect is male.
NOTE
Make sure the rod side of the Raise/Lower
cylinder (R) connects to the hanging cable.
NOTE
Tightly connect the quick disconnects. A loose
connection causes a pressure drop in the hydrau-
lic fluid which heats up the fluid and reduces
component life. A loose quick disconnect may
also stop cylinder movement.
NOTE
Use only Hawk approved quick disconnects.
Part Numbers
Part Name Part #
Male Quick Disconnect (HC, RR) 061-H26M
Female Quick Disconnect (RC, HR)
061-H26F
Installation 13
Raise/Lower Cylinder Hook-Up
Raise/Lower Cylinder Hook-Up
HS
N
SR
RR
HR
HC
RC