User Manual

www . hawk e o p t i c s . c o m
3x32 MAP
Hawke
3x32 MAP
Crossbow scope
Reference guide
Maintaining your scope:
Your scope is a precision instrument that deserves a high level of care. Do not
attempt to disassemble or clean the scope internally.
Keep the protective lens covers in place when the scope is not in use.
The external optical surfaces should be wiped clean occasionally with the lens cloth
provided or an optical quality lens paper. Remove any external dirt or sand with high
pressure air and a soft brush to avoid scratching the lens finish.
Wipe the scope with a damp cloth, then with a dry cloth, then go over the metal section of
the scope with a silicone cloth in order to protect the scope against corrosion.
Always store the scope in a moisture-free environment. Avoid storing the scope in places
such as the passenger compartments of vehicles on hot days as the high temperatures
could adversely affect the lubricants and sealants. Never leave the scope where direct
sunlight can enter either the objective or
the eyepiece lens as damage may result from the
concentration (burning effect) of the suns rays.
WARNING: UNNECESSARY RUBBING OR USE OF A COARSE CLOTH MAY
CAUSE PERMANENT DAMAGE TO LENS COATINGS
Hawke is a registered trademarks.3X32 reticles are © HawkeSport Optics
Ballistic Reticule Calculator Software and the 3x32 reticle
The 3x32 MAP reticle is included in the free Hawke
BRC software. This software is available for PC, MAC
and iPhone. It can be downloaded from
www.hawkeoptics.com or the Appstore.
The software allows the user to determine the aim
points when shooting crossbows with speeds different
to 315fps
Aim Points
Hawke Sport Optics LLC, 6015 HighView Drive, Fort Wayne, Indiana 46818
Congratulations on the purchase
of your new HAWKE Crossbow
scope.
Your new scope is a high
performance optical product
designed to give years of service.
Please read these instructions
carefully before use.