Quick Start Guide

19
Connect other devices
Once your mesh network setup is complete, you can connect other devices such
as your laptop, printer and phone to your VeeaHub.
To connect to your VeeaHub via Wi-Fi, select the network name (SSID) you created earlier while
creating your mesh and enter the Wi-Fi password you’ve set.
To connect wired devices to your VeeaHub, connect another M12 Ethernet cable to an available
Ethernet port on the back of your VeeaHub and then to your wired device.
Connecting via Wi-Fi
Connecting via Ethernet
8
Internet connection for the Mesh Edge Node (MEN)
Your MEN uses the Ethernet port unless you are using 4G as your primary Internet connection.
Connection to a mesh
You can connect additional VeeaHubs into a mesh network using Ethernet instead of Wi-Fi.
Connection to your other devices
You can connect other devices such as security cameras to the network using Ethernet.