Quick Start Guide

6
Setting up multiple VeeaHubs
If you are setting up multiple VeeaHubs in a single session, we recommend the following
steps for a faster, easier initial setup:
1
3
4
Bring all your VeeaHubs to where you have an Internet connection, and a suitable power
source (Refer to Pages 7-11). Do not connect the power at this time.
Note. You can move your devices to their fi nal locations once the setup is complete.
Add all your VeeaHubs to your account using the VeeaHub Manager mobile app (Refer to
Pages 12-13) before connecting them to power.
Connect the power and connect each device directly to the Internet:
For a faster initial setup, use an Ethernet cable (CAT 6 or better) during the setup
If you have an Ethernet Switch, you can temporarily connect them all to the Internet at the same time.
2
Decide which VeeaHub will be the Mesh Edge Node (MEN). The MEN will need to be
connected to the Internet. The fi rst device added to the mesh automatically becomes the MEN.
Note. If you have a 4G-capable VeeaHub, it should be selected as your MEN to allow you to use
our 4G services now or at a later date.