Quick Start Guide

7
1
Before you begin the installation
Dependent on the installation requirement, your professional installer will
require some, or all, of the following materials (Not included in the box) in
order to complete the installation:
IMPORTANT:
Read the important safety and regulatory information on Page 27 before installing your device.
For PoE Midspan injector, Veea recommends Microchip PD-9601GO/AC or equivalent.
A 48V DC power supply rated @1.4 Amps or a PoE Midspan Injector
#14 gauge grounding cable (to be cut to length)
#14 gauge DC power cable (to be cut to length)
CAT6 Ethernet cable (to be cut to length)
Wall mount or Pole mount bracket
M12 dust caps for unused ports.
Sold separately
1
. To order, please contact us by visiting veea.com/support

Wall Mount - Part no.: AC_WMT_H10 | Pole Mount - Part no.: L-COM HGX-PMT17.