User Manual

- 10 -

TURNING THE FISH FINDER ON/OFF

1. To turn the fish finder ON, press and release the button.

2. To turn the fish finder OFF, Press and Hold the

button until

“Shutdown” appears on the screen. Release the button.

NOTICE:

Pressing the button during normal fish finder operation will freeze

the screen allowing you more time to decipher the data. Pressing

the

again will renable the scrolling.

NOTICE:

The fish finder has an automatic “power-off” feature to prevent

battery drain if you accidentally leave the Fish Finder on. When the

depth display reads “---” continuously for 5 minutes, the display will

shut off automatically.

SETTING THE FISH FINDER IN SIMULATION MODE

1. To place the fish finder in Simulation Mode, while

the fish finder is ON, press and release the

button 1 time (“Sonar” will appear at the top of the

screen)

2. Press and release the



button until “Simulator” is

highligted.

3. Press the



to turn ON the Similator Mode ( will appear to the right of

Simulator).

4. Press the



button to turn OFF the Simulator Mode.

5. Press V | ESC to exit the menu and start running the simulator.

OTICE

All features are active in the simulator mode. Use the FishTrax™

simulator to learn how to use the fish finder. The simulator allows you

to adjust features and settings like you are actually operating the fish

finder. Please note that the temperature will be displayed as “---“

unless the Sonar Sensor (Transducer) is plugged into the display.