User Manual

- 15 -

The Menu System Has 3 Tabs:

• Sonar

• Setup

• Advance

To cycle through the Menu System tabs press and release the

button. In

each menu tab use the





buttons to select a specific menu item,

and use the





buttons to change a menu setting, press the V |

ESC button to close the menu system.

A. ADJUSTING THE DETAIL DISPLAYED ON THE SCREEN

Adjusting the amount of detail shown on the VirtuView™ display is as simple

as adjusting the fish finder’s sensitivity. There are 100 user selectable

sensitivity settings to choose from. Select a higher sensitivity setting to show

smaller sonar returns on-screen, or a lower setting to remove clutter from the

screen. Adjusting Sensitivity also affects how sonar returns are identified as

fish icon symbols (FishTarget™) - more fish will be detected at a higher

setting, fewer at a lower setting.

To Adjust the Sensitivity:

1. Press and release the

button 1 time

(SonarI will appear at the top of the

screen)

2. Press and release the



button until the “Sensitivity” box is highligted.

3. Press and release the



button to increase the sensitivty,



to decrease

the sensitivity.