User Manual

- 19 -

• The settings Are: “on/on”, “on/off”, “off/off”

4. Press and release the V | ESC button to exit the menu and return to the

fish finder mode.

NOTICE:

Pressing the button during normal fish finder operation will freeze

the screen making it easier to read the Fish Depth numbers.

Pressing the

again will renable the scrolling.

E. DEPTH CURSER

The depth cursor consists of a horizontal line

with a digital depth box on the right side. The

numbers inside the box show the depth of the

cursor. You can move the cursor to any

location on the screen, letting you pinpoint the

depth of a target.

To Turn the Depth Curser ON or OFF:

1. Press and release the

button 1 time (Sonar

will appear at the top of the screen).

2. Press and release the



button until the “Depth

Curser” box is highlited.

3. Press and release the



button to turn the Depth

Curser ON, press and release the



button to

turn OFF.

4. Press and release the V | ESC button to exit the

menu and return to the fish finder mode.

5. With the Depth Curser ON you can use the



the



buttons to adjust the depth of the line.

F. ADJUSTING THE DISPLAY BACKLIGHT

Turning the backlight feature ON will keep the screen illuminated all the time.

This feature will greatly reduce the battery life of the Fish Finder, so it should

only be used during low light conditions.