User Manual

- 26 -
2. Press and release the

button until the
“Noise Rejection” box is highlited.
3. Press and release the

or the

buttons
to change the setting.
• The settings are:"Off", "High", "Medium", "Low"
4. Press and release the V | ESC button to exit the menu and return to the
fish finder mode.
NOTICE:
If you have high levels of noise, try using the "High"
setting. However, if you are continually having to filter out
the noise, it is suggested that you take steps to find the
source of the interference and fix it. Common sources are
aeration from improper mounting on a vessel or other sonar sources
operating in close proximity to the FishTrax™ 1C.
R. MENU LANGUAGE
The Language setting selects the display language for the Menus.
To Adjust the Menu Language:
1. Press and release the
button 3 times
(“Advance d” will appear at the top of the
screen).
2. Press and release the

button until the “Language” box is highlited.
3. Press and release the

or the

buttons to change the setting.
4. Press and release the V | ESC button to exit the menu and return to the
fish finder mode.
CARE OF YOUR FISH FINDER
1. Clean the sonar sensor and cable with fresh water and dry off before
storing. Do not submerge and/or spray the fish finder screen/housing
with water or use chemicals to clean. If necessary, wipe with a damp
cloth.
2. Remove the batteries from the fish finder to prevent battery leakage and
corrosion.