User`s manual

109
other network devices.
Client PC Please input the MAC address of computer
MAC address (2): or network device here, dash ( - ) or colon ( : ) are not required.
(i.e. If the MAC address label of your wireless device indicates
“aa-bb-cc-dd-ee-ff” or “aa:bb:cc:dd:ee:ff”, just input
“aabbccddeeff”
Computer Name (3): Pull down the menu and all the computers connected to the
Smart Repeater Pro will be listed here. You can easily to select
the computer name without checking the IP address of the
computer.
Comment (4): You can input any text here as the comment of this MAC address,
like “ROOM 2A Computer” or anything. You can input up to 16
alphanumerical characters here. This is optional and you can
leave it blank, however, it’s recommended to use this field to
write a comment for every MAC addresses as a memory aid.
Add (5): Click “Add” button to add the MAC address and associated
comment to the MAC address filtering table.
Reset (6): Remove all inputted values.
MAC Filtering All existing MAC addresses in filtering table
Table (7): will be listed here.
Delete Selected (8): If you want to delete a specific MAC address entry, check the
“select” box of the MAC address you want to delete, then click
“Delete Selected” button. (You can select more than one MAC
addresses).
Delete All (9): If you want to delete all MAC addresses listed here, please click
“Delete All” button.
Reset (10): You can also click “Reset” button to unselect all MAC