User's Manual

7 - HomeRemote Handheld Remote Control

The Handheld Remote Control is used to add and remove Z-Wave devices from your home

control system. The remote is also used for convenient control your home appliances and lights

while at home.

Front Panel Back Panel

The remote control is organized by ‘Channels’ which are the buttons ranging from 1 through 6

and each Channel has a single ON button and OFF button. A ‘Channel’ can be associated with a

single wireless device or multiple devices. By pushing the ON or OFF button will turn ON all

devices in the Channel or OFF all devices in the Channel. The ‘Include’ button is used for

configuring the remote control and the ‘Delete’ button is used for removing devices from the

remote control.

Preparing to use your Handheld Remote Control

Before you begin your initial setup you will need to place 4 AAA batteries into the battery

compartment on the back of the remote as shown below.

(Batteries are not included)