User's Manual

11
8 - First Time Setup
The first time you setup your HomeRemote system you will need to locate the included Setup
CD and the HomeRemote Gateway. Make sure that you have all the requirements before
installing the Gateway (see System Requirements).
Before placing the CD into your CD-Rom drive you will need to connect the hardware. Locate
the HomeRemote Gateway, Power Adapter and Ethernet Cable from your packaging. Connect
the HomeRemote Gateway to your home router as shown below.
When you have verified that there is power to the Gateway and the connection to the router has
been made locate the Setup CD and place it into your PC.
A menu page should load automatically. If it does not, locate your CD-Rom or DVD-Rom drive
icon to browse the contents on the Setup CD and click “autoload.”