User's Manual

9.11 - Transfer Settings to the Gateway

After you have finished adding your modules and

devices to your Handheld Remote Control, the

Transfer Settings page will add the settings to your

Gateway. Click the link to watch the Video Tutorial

for detailed instructions on how to do this.

Place the Remote Control next to the Gateway and

hold the INCLUDE button down until the LEDs begin

to flash. Next push the Channel 1 ON button and

release (the Green LED should remain solid) Click the

Detect Remote button on the Wizard page to begin the

transfer.

9.12 - Customizing / Naming Modules and

Devices

When the Setup Wizard finishes transferring the

settings to your Gateway from your Handheld Remote,

the modules will be listed in the order that they were

added in the Setup Wizard customizing modules page.

For each module you will need to create a custom name

(i.e. Floor Lamp), select a Room that the module is

installed in and select a graphical Icon for the module.

When you have finished click Next to move on.

9.13 - Notification Setup

The Notification Setup page guides you through the

setup of your outgoing mail server for use with the

HomeRemote Alerts and Notifications feature. If you

do not know what your Internet Service Provider’s

Outgoing Mail Server is click the link on the Wizard

page to see the online tutorial. Next you will need to

enter any Email address (this will be the “From” Email

address used when sending text messages and E-mails)

that you have as well as a login and password if

necessary. Test your Email settings to confirm that are

correct, then click Next.