User's Manual

26
12.3.1 - Setting up Scenes
A Scene is a single or group of Devices set to custom levels that is activated with one button, or
single mouse click. Scenes can be used for many applications such as, turning off all lights
before going to bed, setting a lighting scene for watching a movie or settings a dinner scene for
mood lighting. To setup a Scene click “Create a New Scene” on the Device Management Page.
1) Name the Scene that you will be
creating. (i.e. Movie Time)
2) Add the devices and settings for
the devices into your Scene. To do
this click the Room and then select
the Device from the right drop
down bar. Once the device has
been added select the action and
setting you wish the device to be
in when you activate your scene.
3) Add more devices if needed to
complete your “Scene”
The Scene Management page allows you to be notified when a Scene has been activated in your
home. To do this you can select a Notification account from your Notification List. If you do
not have any Notification accounts see the Notification and Alerts Setup section of this manual.
The Scene Management page also allows for scheduling of your “Scenes” For example, if you
are away from vacation you can set up an Outdoor Lighting scene to turn ON everyday at a given
time and OFF at a given time to make it appear like somebody is home.
You can create multiple Scenes with many devices in each Scene.
Note: Scenes created on your Gateway will not be transferred to your Handheld Remote Control
or vice versa. You will need to create your Scenes individually for the Remote Control and the
HomeRemote Gateway.
12.3.2 - Alerts and Notifications
Before you begin using the Alerts and Notifications page you will need to setup your
Notification Settings in the Setup page. If you have not done so, please do so first before
continuing.