User's Manual

45
13.8 - Cell Link Options Menu and Navigation Tips
The Cell Link Main Menu contains functions that you can use to customize the setup of your
phone. Items such as a Personal Identification Number (PIN) or activation of short cut codes can
be turned on or off to fit your needs. Depending on the model of your phone, these menu options
may appear in a different order than listed below, but they will function as described.
13.8.1 - Set Cell Link PIN / Disable PIN
For security purposes, you can setup a PIN that will prevent unauthorized people from accessing
the Cell Link software on your phone. It is important to note that no personal information is
contained within the Cell Link application, and at no time is personal information transmitted
from your phone or the Cell Link application. (Please visit www.cell-link.homeremote.net for
details about our privacy policy)
The default configuration of Cell Link has the PIN feature disabled. If you would like to set a
PIN code that you must enter each time you use Cell Link, you must select ‘Set PIN’ from the
Cell Link Main Menu. When you select ‘Set PIN’ you will be prompted to enter a 4-digit
number code. You must then verify this code by entering it a second time. Your phone will
display the message “Your PIN has been set.” Please remember your PIN or write it down and
keep it in a safe place. (If you forget your PIN, you must call customer service at 888-202-
3344).
When you select ‘Disable PIN’ your phone will display the message “Your PIN has been
disabled.” The next time that you open Cell Link you will not be prompted to enter your PIN.
Your phone will display the Cell Link Main Menu. (Note: If you disable the PIN feature, an
unauthorized user that has access to your cellular phone may be able to utilize the Cell Link
software to access your HomeRemote System.
13.8.2 - Reset Cell Link
Cell Link can also be reset to its default configuration by selecting the ‘Reset’ command from
the Options Menu. This selection requires your confirmation and you will be prompted to select
‘Yes’ to continue. YOU SHOULD ONLY DO THIS WHEN INSTRUCTED TO DO SO BY
CUSTOMER SERVICE. This option will delete the configuration file from your phone and you
will need to re-activate your software. You will not be able to control your HomeRemote system
until you have re-activated.
13.8.3 - BlackBerry® Connection Options and Select Button
There are some Options Menu commands that are specific to BlackBerry® devices.