User's Manual

46
These commands enable the Cell-Link application to properly send commands over the internet
as well as make use of the ‘thumb wheel’ navigation control on the
BlackBerry® device.
13.8.4 - Connection Options
If you have a BlackBerry® device, it is necessary to set the connection settings of your
BlackBerry® so Cell-Link can access the internet to communicate with your home automation
system. You may set these connection settings by selecting the ‘Connection Options’ command
in the Options Menu. You will then be prompted to select your cellular carrier. If you do not see
your cellular carrier, you can try the ‘Direct TCP’ option. If you are still having issues
controlling your home automation system with your
BlackBerry®, please contact customer service at 1.888.202.3344.
13.8.5 - Select Button
For a BlackBerry® device, the ‘Select’ command is always located at the top of the Options
Menu. This allows you to use the thumb wheel to navigate through the Cell-Link menus. You
may make a selection by depressing the thumb wheel. This brings up the Options Menu. Since
‘Select’ is at the top, depressing the thumb wheel a second time will navigate the menus and
execute functions.
13.8.6 - Demo/Active Mode
Demo Mode may be activated if you wish to temporarily show someone the Cell-Link menus. In
this mode, no signals will be sent over the network to your home automation system. You can
activate this mode by selecting the ‘Demo Mode’ command from the Options Menu. You can
enter Active Mode again for normal home automation system control by selecting the ‘Active
Mode’ command from the Options Menu.
13.8.7 - Help
Cell-Link’s on-screen help describes the basic function of the software and can be used as a
reference if you need a reminder on how to navigate the screens. These help screens can be
accessed via the ‘Help’ command on the Options Menu.
13.8.8 - About
This command displays the current software version of Cell-Link, as well as some information
that may be useful to customer care if you are experiencing issues with your system. You can
access this information by selecting the ‘About’ command from the Options Menu.