System information

24
2-4 Basic Setup
In this chapter, you’ll learn how to change the time zone, password, and
remote management settings. Please start your web browser and log onto
Smart Repeater web management interface, then click on the ‘General Setup’
tab.
2-4-1 Time zone and time auto-synchronization
Please follow the following instructions to set time zone and time
auto-synchronization parameters:
Please click ‘System’ tab in menu on the left of web management interface,
then click on Time Zone. Please select the correct time zone from the
drop-down list, and input the IP address or host name of time server. If you
want to enable daylight savings time settings, please check ‘Enable Function’
box, and set the duration of daylight setting. When you finish, click ‘Apply’.
You’ll see the following message displayed on web browser: