System information

2-6-2 DHCP Server:

These settings are only available when ‘DHCP Server’ in ‘LAN IP’ section is

‘Enabled’, and here are descriptions of every setup item:

Lease Time (1): Please choose a lease time (the duration that every

computer can keep a specific IP address) of every IP

address assigned by this Smart Repeater from

dropdown menu.

Start IP (2): Please input the start IP address of the IP range.

End IP (3): Please input the end IP address of the IP range.

Domain Name (4): If you wish, you can also optionally input the domain

name for your network. This is optional.

Recommended Value if you don’t know what to fill:

Lease Time: Two Weeks (or ‘Forever’, if you have less than 20 computers)

Start IP: 192.168.5.1

End IP: 192.168.5.199

Domain Name: (leave it blank)

NOTE:

1. The number of the last field (mentioned ‘d’ field) of ‘End IP’ must be greater than

‘Start IP’, and can not be the same as Smart Repeater’s IP address.

2. The former three fields of IP address of ‘Start IP’, ‘End IP’, and ‘IP Address of ‘LAN

IP’ section (mentioned ‘a’, ‘b’, and ‘c’ field) should be the same.

3. These settings will affect wireless clients too.