User's Manual

93
Client PC Please input the MAC address of computer
MAC address (2): or network device here, dash ( - ) or colon ( : ) are not
required. (i.e. If the MAC address label of your wireless
device indicates ‘aa-bb-cc-dd-ee-ff’ or
‘aa:bb:cc:dd:ee:ff’, just input ‘aabbccddeeff’
Computer Name (3): Pull down the menu and all the computers connected to
the Smart Repeater will be listed here. You can easily to
select the computer name without checking the IP
address of the computer.
Comment (4): You can input any text here as the comment of this
MAC address, like ‘ROOM 2A Computer’ or anything.
You can input up to 16 alphanumerical characters here.
This is optional and you can leave it blank, however, it’s
recommended to use this field to write a comment for
every MAC addresses as a memory aid.
Add (5): Click ‘Add’ button to add the MAC address and
associated comment to the MAC address filtering table.
Reset (6): Remove all inputted values.
MAC Filtering All existing MAC addresses in filtering table
Table (7): will be listed here.
Delete Selected (8): If you want to delete a specific MAC address entry,
check the ‘select’ box of the MAC address you want to
delete, then click ‘Delete Selected’ button. (You can
select more than one MAC addresses).
Delete All (9): If you want to delete all MAC addresses listed here,
please click ‘Delete All’ button.
Reset (10): You can also click ‘Reset’ button to unselect all MAC
addresses.
Enable IP Check this box to enable IP address based