User's Manual

2-2 Accessing the Web Setup Menu

After your Smart Repeater has been connected and powered the next

step is to access the Web Menu for initial configuration.

To do this, your computer must be able to get an IP address automatically

(use dynamic IP address). If it’s set to use static IP address, or you are unsure,

please follow the following instructions to configure your computer to use

dynamic IP address:

Try to access: http://setup.hawkingtech.com

(or try typing:

http://192.168.1.200

into your Internet browser’s address bar)

If the Web Menu appears you can skip this step and go to step 2-3. You will

need to enter the following default login and password to access the ‘Quick

Setup’ menu:

Password: 1234

If you cannot access the setup page follow the steps below to obtain the

correct IP address:

If the operating system of your computer is….

Windows 95/98/Me - please go to section 2-2-1

Windows 2000 - please go to section 2-2-2

Windows XP - please go to section 2-2-3

Windows Vista - please go to section 2-2-4