User's Manual

28
2-4-3 Remote Management
This Smart Repeater does not allow management access from Internet, to
prevent possible security risks. However, you can still manage this Smart
Repeater from a specific IP address by enabling the ‘Remote Management’
Function.
To do so, please follow the instructions:
Please click ‘General Setup’ tab at top of web management interface, then
click ‘Remote Management’ from the menu on the left, and the following
message will be displayed on your web browser:
Here are descriptions of every setup item:
Host Address (1): Input the IP address of the remote host you wish to
initiate a management access.
Port (2): Define the port number that the Smart Repeater will
receive incoming requests from. If you are providing a
web service (default port number is 80), you should try
to use other port number. You can use the default port
setting ‘8080’, or something like ‘32245’ or ‘1429’. (Any
integer between 1 and 65534)
Enabled (3): Select the field to start the configuration.
1 2 3