User Manual

Model No: HWRG1

Wireless Advanced Settings

Authentication Type Open System

： If your access point/wireless router is using "Open

" authentication, then the wireless adapter will need to be set to the

same authentication type.

Shared Key: Shared Key is when both the sender and the recipient

share a secret key.

Auto: Select Auto Switch for the adapter to automatically select the

appropriate

Preamble Type

A preamble is a signal used in wireless environment to synchronize the

transmitting timing including Synchronization and Start frame delimiter.

(Note: If you want to change the Preamble type into Long or Short, please

check the setting of AP.)

Broadcast SSID

Enable: This wireless AP will broadcast its SSID to stations.

Disable: This wireless AP will not broadcast its SSID to stations. If stations want

to connect to this wireless AP, this AP’s SSID should be known in advance to

make a connection.

Save

After completing the settings on this page, click Save to save the

settings.

Reset

Click Reset to restore to default values.