User Manual

Model No: HWRG1

Rear Panel

Figure 2: Rear Panel

Power port

Connect the supplied power adapter here.

10/100BaseT

LAN port

Use standard LAN cables (RJ45 connectors) to connect your PCs to

these ports.

If required, any port can be connected to another hub. Any LAN port

will automatically function as an "Uplink" port when necessary.

Internet port

(10/100BaseT)

Connect the DSL or Cable Modem here. If your modem came with a

cable, use the supplied cable. Otherwise, use a standard LAN cable.

Reset Button

This button has two (2) functions:

• Reboot. When pressed and released, the Wireless Router will

reboot (restart).

• Clear All Data. This button can also be used to clear ALL data

and restore ALL settings to the factory default values.

To Clear All Data and restore the factory default values:

1. Power Off.

2. Hold the Reset Button down while you Power On.

3. Keep holding the Reset Button for a few seconds, until the RED

LED has flashed TWICE.

4. Release the Reset Button. The Wireless Router is now using the

factory default values.