User Manual

Model No.: HWRG1

Installation

This Chapter covers the physical installation of the Wireless Router.

Requirements

• Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45 connectors.

• TCP/IP protocol must be installed on all PCs.

• For Internet Access, an Internet Access account with an ISP, and either of a DSL or Cable

modem (for WAN port usage)

• To use the Wireless Access Point, all Wireless devices must be compliant with the

IEEE802.11b or IEEE802.11g specifications.

Procedure

1. Choose an Installation Site

Select a suitable place on the network to install the Wireless Router.

Ensure the Wireless Router and the DSL/Cable modem are powered OFF.

2. Connect LAN Cables

Use standard LAN cables to connect PCs to the Switching Hub ports on the Wireless

Router. Both 10BaseT and 100BaseT connections can be used simultaneously.