User's Manual

19
An Authentication and Security Window (figure 7.1b) should appear shortly.
Figure 7.1b
WEP Setup Instructions:
(All settings should correspond with settings of the wireless AP that you are connecting to.)
a. Authentication Type field: indicates the authentication type of the AP/Router.
Please confirm the setting of the AP/Router.
• Open: WEP open system is based on request and grant. It is essentially
no authentication.
• Shared: WEP shared key is based on request, challenge, challenge
response, grant/deny.
b. Encryption field: Select WEP
c. Enter in AP encryption keys (64/128bits) in the box Key1~Key4. Please accept
the auto selected setting of [Hex]/ [ASCII].
d. Select the current AP encryption keys from Key1~Key4.
e. Press [OK] to finish setting.
7.1.2. WPA Setup
WPA encryption type can be divided into WPA-PSK, WPA2-PSK, WPA (also known
as WPA-EAP), and WPA2 (also known as WPA2-EAP). All settings should
correspond with the wireless AP that you wish to connect to.