User's Manual

23
• SSID: Click the drop-down menu and select one AP. You can also enter the
AP manually.
• PSM: When CAM is selected, it indicates that the product is not in power
saving status. When PSM is selected, the product is in power saving status.
(Only select it under Infrastructure network type).
• Network Type: [Infrastructure] or [Ad Hoc] type. We recommend you to
select [Infrastructure].
• Transmit power: the amount of power used by a radio transceiver to send
the signal out. User can choose power value by sliding the bar.
• [RTS Threshold] and [Fragment Threshold]: We recommend you to use the
default value 2312. User can adjust threshold numbers by sliding the bars or
key in the values directly.
3. Click OK and the set AP will appear in the Profile tab.
• Add: Click Add to add a new profile.
• Delete: to delete a profile, select one profile name and click Delete.
• Edit: to edit the setting of a profile, select the profile and click Edit.
• Activate: to activate the selected profile, select the profile and click Activate.