User Manual

5-9-3 Virtual AP WDS Setup
When WDS is enabled, access point functions as a wireless bridge and is able to communicate with other access
points via WDS links. A WDS link is bidirectional and both side must support WDS. Access points know each other
by MAC Address. In other words, each access point needs to include MAC address of its peer. Ensure all access
points are configured with the same channel and own same security type settings.
WDS MAC List Enable: Check “Enable” to create WDS link.
WDS Peer's MAC Address: Enter the MAC address of WDS peer.
Description: Description of WDS peer
Note: All WDS peers need to have same WiFi Channel and same Security Type.
5-9-4 VAP Mac Filter Setup
For each Virtual AP, users can allow or reject clients based on their MAC address. Click on Wireless, Virtual AP
setup, Next to the VAP you wish to change, click on VAP MAC Filter Edit to configure these settings.