User Manual

Action: Select the desired access control type from the drop-down list; the options are Disable, Allow or
Reject.
Only Allow List MAC: Define certain wireless clients in the list which will have granted
access to the Access Point while the access will be denied for all the remaining clients –
Action Type is set to “Only Allow List MAC”.
Only Deny List MAC: Define certain wireless clients in the list which will have denied
access to the Access Point while the access will be granted for all the remaining clients -
Action Type is set to “Only Deny List MAC”. MAC Access Control is the weakest security
approach. WPA or WPA2 security methods should be used when possible.
Mac Address: Type in the Mac address of the client you wish to add under the Mac filter.
5-10 WDS Setup
The administrator could create WDS Links to expand wireless network. When WDS is enabled, access point
functions as a wireless bridge and is able to communicate with other access points via WDS links. A WDS link is
bidirectional and both side must support WDS. Access points know each other by MAC Address. In other words,
each access point needs to include MAC address of its peer. Ensure all access points are configured with the
same channel and own same security type settings. (This feature is only available in WDS Mode)
Security Type: Option is “Disable”, “WEP”, “TKIP” or “AES” from drop-down list.