User Manual

6-3 MAC Filter
Allows users to create MAC filter rules to allow or deny unicast or multicast packets from limited number of MAC
addresses. That MAC filter rules have precedence over IP Filter rules. (This feature is only available in Router AP
and CPE + Repeater AP Modes)
MAC Filter Rule: Disable is the default setting. Options are Disabled, Only Deny List MAC or Only Allow
List MAC.
Only Allow List MAC: The wireless clients in the MAC Filter List will be allowed to access
to Access Point; All others will be denied.
Only Deny List MAC The wireless clients in the MAC Filter List will be denied to access to
Access Point; All others will be allowed.
MAC Address: Enter MAC address (e.g. aa:bb:cc:dd:ee:ff) and click “Add”. The MAC address should
display in the MAC Filter List. There are a maximum of 20 clients allowed in this MAC
Filter List. The MAC addresses of the wireless clients can be added and removed to the
list using the Add and Delete buttons.
Schedule: Can choose to use rule by “Time Policy”
6-4 Virtual Server
This function allows you to redirect a port on Internet IP address (on WAN port) to a specified port of an IP address
on local network, so you can setup an Internet service on the computer on local network, without exposing it on
Internet directly. It is also referred to as “Port Forwarding”. You can also build many sets of port redirection, to
provide many different Internet services on different local computers via a single Internet IP address. (This feature
is only available in Router AP and CPE + Repeater AP Modes)