User Manual

Application: Choose the application you wish to block. A small list of presets are
available
Schedule: Can choose to use rule by “Time Policy”
Service: Check Enable button to activate this rule, and Disable to deactivate.
Click “Add” button to add control rule to List. There are 10 rules maximum allowed in this Control List. All rules can
be removed or edited on the list.
6-6 QoS
Quality of Service (QoS) refers to both a network's ability to deliver data with minimum delay, and the networking
methods used to control the use of bandwidth. Without QoS, all traffic data is equally likely to be dropped when
the network is congested. This can cause a reduction in network performance and make the network inadequate
for time-critical application such as video-on-demand.
Bandwidth Control Service
The default is Disable, Click “Enable” to enable QoS Service.
Mode: Can choose a total Bandwidth control or Per Rule Bandwidth control.
Total Bandwidth: the function is all customers use a total bandwidth.
Upload: Setting use upload control by total bandwidth
Download: Setting use download control by total bandwidth
Per Rule Bandwidth: Use the rules to define the classifiers. After you define the rules, you can specify
action to act upon the traffic that matches the rules