User Manual

Comment: Enter a descriptive name for this rule for identifying purposes.
Type:
IP Address / IP segment: Specify local(LAN)/ destination IP addresses range required for
this rule. If you specify local IP addresses range from 192.168.1.1 to 192.168.1.254. The
matches a range of local IP addresses include every single IP address from the first to the
last, so the example above includes everything from 192.168.1.1 to 192.168.1.254.
Port: Specify local port(LAN port) range required for this rule.
MAC: Enter MAC address in valid MAC address format (aa.bb.cc.dd.ee.ff) and click
“Save”
Application: Bittorrent, eDonkey2000, FTP and HTTP
Upload: Setting use upload control by total bandwidth
Download: Setting use download control by total bandwidth
6-7 IP Routing
The IP Routing Settings allows you to configure routing feature in the gateway. The system supports RIP(Routing
Information Protocol ) and OSPF(Open Shortest Path First) dynamic routing and allows you to manually configure
static network routes. (This feature is only available in Router AP and CPE + Repeater AP Modes)
OSPF Settings