User Manual

Upgrade Firmware: Upgrade firmware will support via Local PC, TFTP Server and HTTP URL upgrade
7-3 Network Utility
The administrator can diagnose network connectivity via the PING or TRACEROUTE utility.
Ping: This utility will help ping other devices on the network to verify connectivity. Ping utility, using
ICMP packets, detects connectivity and latency between two network nodes. As result of that,
packet loss and latency time are available in the Result field while running the PING test.
IP/Domain: Enter desired domain name, i.e. www.google.com, or IP address of the destination,
and click ping button to proceed. The ping result will be shown in the Result field.
Count: The default setting is 5 and the range is from 1 to 50. It indicates number of connectivity
test.
Traceroute: Allows tracing the hops from the device to a selected outgoing IP address. It should be used for
the finding the route taken by ICMP packets across the network to the destination host. The test
is started using the Start button, click Stop button to stopped test.
Destination Host: Specifies the Destination Host for the finding the route taken by ICMP packets
across the network.
MAX Hop: Specifies the maximum number of hops (max time-to-live value) trace route will probe.