User Manual

DHCP Server Status: Display the information of the DHCP Server.
DHCP Client List: Display the information of the DHCP Client users.
8-3 Extra Info
Users could pull out information such as Route table, ARP table, MAC table, Bridge table or STP available in the
drop-down list from system. The “Refresh” button is used to retrieve latest table information.
Netstat Information: This will show all connection track on the system, the information include
Protocol, Live Time, Status, Source/Destination IP address and Port.
Route Information: This displays Route Information. Static routes to specific hosts, networks or
default gateway are set up automatically according to the IP configuration of
system's interfaces. When used as a L2 device, it could switch packets and, as L3
device, its capable of being a gateway to route packets inward and outward.
ARP Table Information: ARP associates each IP address to a unique hardware address (MAC) of a
device. It is important to have a unique IP address as final destination to switch
packets to.
Bridge table information: Bridge table will show Bridge ID and STP's Status on the each Ethernet bridge
and its attached interfaces, the Bridge Port should be attached to some
interfaces (e.g. eth2, ra0~ra7 and wds0~wds3).
Bridge MACs Information: This table displays local MAC addresses associated with wired or wireless
interfaces, but also remember non-local MAC addresses learned from wired or