User Manual

Note: you will need an Ethernet cable long enough to go from the device to the PoE injector. The PoE injector is not weather
proofed. We do not recommend any cabling over 100 feet in length.
Note2: Make sure you also use a long enough grounding cable (not included) to mount to your grounding point. We
recommend 16-18 AWG grounding cable
9-3 Antenna Orientation
Once you have mounted and connected HPOW5/HPOW10D, be sure to note the signal pattern of the antenna.
Only devices within the transmission cone are guaranteed to get a good signal. You will receive optimal wireless
signal by placing your wi-fi enabled device within the designated area. Adjust the antenna as needed.
The HPOW5 has a 360 degree coverage radius. As seen in the diagram below, the signal will be transmitted in a sphere
around the HPOW5. All devices within the range of the device should get a signal.
The HPOW10D has a directional antenna that transmits in a 60 degree cone. As indicated by the diagram, the
directional antenna does not give off a strong signal directly below or directly behind the product. The directional
antenna allows you to aim your signal towards a specific source so you can better optimize your network needs.