User Manual

Port: The port number used by Authentication RADIUS server. Use the default
1812 or enter port number specified.
Shared secret: The secret key for system to communicate with Authentication
RADIUS server. Support 1 to 64 characters.
5-4 Repeater AP MAC Filter
For each Repeater AP, users can allow or reject clients based on their MAC address. Click on Wireless, Repeater AP
MAC Filter Setup. (This feature is only available in Client Bridge + Repeater AP and CPE + Repeater AP Modes)
Action: Select the desired access control type from the drop-down list; the options are Disable, Allow or
Reject.
Only Allow List MAC: Define certain wireless clients in the list which will have granted
access to the Access Point while the access will be denied for all the remaining clients –
Action Type is set to “Only Allow List MAC”.
Only Deny List MAC: Define certain wireless clients in the list which will have denied
access to the Access Point while the access will be granted for all the remaining clients -
Action Type is set to “Only Deny List MAC”. MAC Access Control is the weakest security
approach. WPA or WPA2 security methods should be used when possible.
Mac Address: Type in the Mac address of the client you wish to add under the Mac filter.
5-5 Station Profile
Settings for Client Bridge. (This feature is only available in Client Bridge + Repeater AP and CPE + Repeater AP
Modes)
Connection Setup: Choose Fix or cycle
General Configuration: