User Manual

MAC address: The remote AP MAC Address
Profile Name: Set different profiles for quick connection uses.
ESSID: Assign Service Set ID for the wireless system. This should be the ESSID fo the remote AP
Lock to AP MAC: the function will lock remote AP MAC Address.
Security Type: Select an appropriate security type for association, the Security Type can be selected in
“NONE”, “OPEN”, “SHARED”, “WPA-PSK”, or “WPA2-PSK” from drop-down list. The
security type must be the same as the associated access point.
OPEN / SHARED: OPEN and SHARED require the user to set a WEP key to
exchange data.
Key Index: key index is used to designate the WEP key during data
transmission. 4 different WEP keys can be entered at the same time,
but only one is chosen.
WEP Key #: Enter HEX or ASCII format WEP key value; the system
supports up to 4 sets of WEP keys. Key Length Hex ASCII 64-bit 10
Characters 5 Characters 128-bit 26 Characters 13 Characters
WPA-PSK (or WPA2-PSK): WPA (or WPA2) Algorithms, allows the system
accessing the network by using the WPA-PSK protected access.
Cipher Suite: Select the desired cipher suite from the drop-down list;
the options are AES and TKIP.
Pre-shared Key: Enter the information for pre-shared key; the key can
be either entered as a 256-bit secret in 64 HEX digits format, or 8 to 63
ASCII characters.
Profile List: The user can manage the created profiles for home, work or public areas.