User Manual

Click “”Edit” to edit an existing profile on the Profile List. The field of System
Configuration and Security Policy will display profile's content. Edit profile's content and
then click “Save” button to save the profile.
Click “Delete” to remove profile.
Click and Select a profile from list, then click the “Connect” button to connect to the
wireless network with the profile setting.
Before you click “Connect” button for connection, Please double check the “Channel” setting of “Wireless General
Setup” as it must be the same with associated AP channel setting
If you only click “Connect” button and do not click “Save”, the profile will not be saved.
5-6 Associated Clients
This page shows detailed wireless information and all associated client status. This page will show different
information depending on the Mode you are in.