User Manual

Security: Security type by all found Access Points.
Select: Click “Select” to configure settings and associate with chosen AP.
While clicking “Select” button in the Site Survey Table, the “ESSID” and “Security Type” will apply in the Wireless
General Setup. However, more settings are needed including Security Key.
5-9 Virtual AP Setup
The administrator can create Virtual APs on this page. (This feature is only available in Router AP and AP Modes)
VAP: Display number of system's Virtual AP.
MAC Address: The MAC address of the VAP Interface is displayed here. When you enable AP and
reboot system, the MAC address will display here
ESSID: Display Virtual AP's ESSID; default is AP00~AP07.
Status: Display VAP status; default VAP0 is always on and only VAP0 can support WPS function.
Security Type: Display Virtual AP's Security Type; default is disabled.
MAC Filter Setup: Click “Setup” button for configuring Virtual AP's Access Control List.
VAP Edit: Click “Edit” button for configuring Virtual AP's settings and security type.
5-9-1 Virtual AP General Configuration
For each Virtual AP, users can configure general settings and security. Click “edit” on the Virtual AP you wish to
edit.