User Manual

Master Key Update Period: This time interval for re-keying GMK
(master key used internally to generate GTKs) in seconds. Enter the
time-length required; the default time is 83400 seconds.
Key Type: Check on the respected button to enable either ASCII or HEX
format for the Pre-shared Key.
Pre-Shared Key: Enter the information for pre-shared key; the format
of the information shall according to the key type selected. Pre-shared
key can be either entered as a 256-bit secret in 64 HEX digits format, or
8 to 63 ASCII characters.
WPA-Enterprise (or WPA2-Enterprise) General Setting. The RADIUS
authentication and encryption will be both enabled if this selected.
General Setting:
Cipher Suite: You can chose use AES or TKIP with your WPA / WPA2
encryption method,
AES is short for “Advanced Encryption Standard”, The AES cipher is
specified as a number of repetitions of transformation rounds that
convert the input plaintext into the final output of ciphertext. Each
round consists of several processing steps, including one that depends
on the encryption key. A set of reverse rounds are applied to transform
ciphertext back into the original plaintext using the same encryption
key.
TKIP is short for “Temporal Key Integrity Protocol”, TKIP scrambles the
keys using a hashing algorithm and, by adding an integrity-checking
feature, ensures that the keys haven’t been tampered with.
Group Key Update Period: This time interval for re-keying GTK
(broadcast/multicast encryption keys) in seconds. Enter the time-
length required; the default time is 600 seconds.
Master Key Update Period: This time interval for re-keying GMK
(master key used internally to generate GTKs) in seconds. Enter the
time-length required; the default time is 83400 seconds.
EAP Reauth Period: This time interval for re- authentication in seconds.
Enter the time-length required; the default time is 3600 seconds; 0 =
disable re-authentication.
Authentication RADIUS Server Settings
Authentication Server: Enter the IP address of the Authentication
RADIUS server.
Port: The port number used by Authentication RADIUS server. Use the
default 1812 or enter port number specified.