Overview Check Package Contents Wireless Multimedia Control Pad Control Pad Receiver USB Power Cable User Manual + Quick Guide Warranty Information Table of Contents: 1. 2. 3. 4. 5.
Quick Start: Your wireless multimedia control pad uses RF technology to connect to your Media device and comes with 650mAh battery built-in. Read these instructions to learn about the indicator light, and how to use the keypad/mouse mode. Introduction: This innovative wireless touch-pad has all the functions of a standard wireless mouse and keyboard in one portable device.
To begin, simply remove the Control Pad Receiver from the top of the Control Pad and insert it into your USB drive. Power-on the Control Pad and wait for the blue LED light to flash three times.
Function description To switch between modes, simply press and hold the “home” button for two seconds.
Cursor Mode
Charging Plug in the USB cable to the USB Charging Port and any USB power source (USB charger or computer USB port) to charge the device. Features Advanced RF technology allows it to work at any location and from any direction; there is no need to point it at the computer. The Touch-Pad makes cursor movement smooth, easy and comfortable. Backlit keyboard helps you maneuver content seamlessly.
RF 2.4G reliable wireless Wireless connection with up to 20 meter range (Open space) Supports 1 or 2 finger touch applications Internal G-sensor Low power consumption supports up to 3200 hours of standby Plug & Play Win, MAC & Linux base supported Backlight keyboard operation USB rechargeable power design (requires only one hour to fully charge) FAQ Please visit http://www.hawkingtech.com for constantly updated FAQ.
Copyright ©2010 by Hawking Technologies, Inc. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of this company.
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
This equipment complies with all the requirements of DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL of March 9, 1999 on radio equipment and telecommunication terminal Equipment and the mutual recognition of their conformity (R&TTE). The R&TTE Directive repeals and replaces in the directive 98/13/EEC (Telecommunications Terminal Equipment and Satellite Earth Station Equipment) As of April 8, 2000.