User manual
Table Of Contents
- FCC Caution
- Federal Communications Commission (FCC) Radiation Exposure Statement
- Federal Communications Commission (FCC) RF Exposure Requirements
- R&TTE Compliance Statement
- Safety
- EU Countries Intended for Use
- Features
- Specifications
- Package Contents
- Wireless Connection Status
- General Connection Setting
- WEP and WPA Encryption
- Advanced Setting
- Software AP Mode
1.8 Software AP Mode
The HWU54G USB Wireless-G adapter has a unique feature that allows it to function
as a Wireless Access Point. By changing the mode in the Configuration Utility the
HWU54G can provide wireless access to surrounding clients. Configuring the AP
parameters such as channel, SSID, MAC Address Filtering, WEP encryption and so
on are described in the following:
3.1.3 AP Connection Status
Parameter Description
Mode Station – Set the USB adapter a wireless client.
Access Point – Turns the USB adapter to function as a
wireless AP.
Network Adapter Display the product information of the USB Adapter.
Connect Station List Display all the MAC Addresses of the wireless adapters which
are connecting to the AP.
Current Network Setting Display the connection setting of the current network. It
includes Channel, SSID, WEP and TX Power Level.
More Setting For setting more functions including disable/enable
WEP, MAC Address Filter and Bridge Adapter, etc.
Please refer to Section 3.5.2.
TX Frame It shows the number of data frames which are transmitted by
23