User Manual

REPLACING THE LID HANDLE

SCREW WHICH HOLDS LATCH

AND HANDLE

REPLACING THE LONG BODY HANDLE

REPLACING THE SHORT BODY HANDLE

PLACING THE NUT

FOR THE LONG HANDLE

PLACING THE NUT

FOR THE SHORT HANDLE

Before unscrewing the lid handle, remove the pressure regulator

and put the lid on a soft surface such as a soft cloth to avoid damaging

the lid and metal handle. Unscrew the screws holding the old handle.

Place the new handle in position and screw it on. The lid handle is

screwed on directly into the metal threads molded into the plastic handle.

The screw towards the end of the handle also holds the latch.

For most sizes of the Futura Pressure Cooker, the plastic handles

need a nut and screw to be fixed. The nut and screw come with the

plastic handles.

In the case of each of the body handles for all sizes of Futura (except

the 2 Liter, 3 Liter and the hard anodised 4 Liter), the nut has to be

placed between the bracket and the body of the cooker. Then the plastic

handle should be put in place and screwed tight.

There is no nut for the 2 Liter, 3 Liter and the hard anodised 4 Liter

Futura pressure cooker body handles; attach each handle directly into

the bracket with the screw.